Dell PowerConnect W-7200 Series Reference Manual page 1073

1 10.6.2.252
66 10.6.6.252
63 10.6.3.252
The output of this command includes the following parameters:
Parameter
VLAN
Addr
Netmask
MAC Address
IGMP
Snooping
Querier
Destination
IGMP Proxy
The following example displays the current IGMP configuration settings for the controller.
(host) #show ip igmp config
IGMP Config
-----------
Name
----
robustness-variable
query-interval
query-response-interval
startup-query-interval
startup-query-count
last-member-query-interval
last-member-query-count
version-1-router-present-timeout
The output of this command includes the following parameters:
Parameter
robustness-variable
query-interval
query-response-interval
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
255.255.255.0 00:0b:86:01:99:00
255.255.255.0 00:0b:86:01:99:00
255.255.255.0 00:0b:86:01:99:00
Description
A VLAN ID number.
IP address of a VLAN router.
Subnet mask for the IP address.
MAC destination address.
Indicates if IGMP is enabled (or disabled) on the interface.
Indicates if IGMP snooping is enabled (or disabled).
IP address of an IGMP querier.
Traffic destination.
Indicates if IGMP proxy is enabled (or disabled).
Value
-----
2
125
100
31
2
10
2
400
disabled
disabled
disabled
Description
This variable is increased from its default level of 2 to allow for expected
packet loss on a subnetwork.
Interval, in seconds, at which the controller sends host-query messages to
the multicast group address 224.0.0.1 to solicit group membership
information.
Maximum time, in .1 second intervals, that can elapse between when the
disabled 10.6.2.252
disabled
disabled 10.6.6.252
disabled
disabled 10.6.3.252
disabled
show ip igmp | 1073
CP
CP
CP