Dell PowerConnect W-7200 Series Reference Manual page 1087

show ipc statistics app-ap
show ipc statistics app-ap {am|sapd|sta} {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-
addr>}
Description
Display Inter Process Communication (IPC) statistics for a specific AP or BSSID.
Syntax
Parameter
am
sapd
stm
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
Usage Guidelines
Issue this command at the request of Dell support to troubleshoot application errors.
Example
The following example shows IPC statistics for the SAPD process on an AP named mpp125.
(host) #show ipc statistics app-ap sapd ap-name mpp125
Local Statistics
To application
Tx Ack
MESH
1
RF Client
1
STM
0
Nanny
0
Remote Statistics
To application
Tx Ack
AMAPI CLI Client
1
STM
0
Allocated Buffers
Static Buffers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show IPC statistics for an air monitor.
Show IPC statistics for the SAPD process.
Show IPC statistics for station management communications.
Show IPC statistics for an AP with a specific name.
Show IPC statistics for a specific Basic Service Set Identifier (BSSID). An AP's BSSID is
usually the AP's MAC address.
Show IPC statistics for an AP with a specific IP address. Enter the IP address in dotted-
decimal format.
Tx Msg Tx Blk Tx Ret
3 0
1 0
1 0
1 0
Tx Msg Tx Blk Tx Ret
0 0
248 0
0
1
Tx Fail Rx Ack
1 0 3
0 0 1
0 0 1
0 0 1
Tx Fail Rx Ack
0 0 0
0 0 0
Rx Msg Rx Drop Rx Err
1 1
1 0
0 0
0 0
Rx Msg Rx Drop Rx Err
1 0
248 0
show ipc statistics app-ap | 1087
0
0
0
0
0
0