Usage Guidelines - Dell PowerConnect W-7200 Series Reference Manual

Usage Guidelines

The controller will send a wlsxThresholdAbove SNMP trap and a syslog error message when the controller has
exceeded a set percentage of the total capacity for that resource. A wlsxThresholdBelow SNMP trap and error
message will be triggered if the resource usage drops below the threshold once again.
Example
The following command shows the current alert thresholds for controlpath memory resources:
(host) (config) #show threshold-limits controlpath-memory
Threshold Values For Controlpath Memory
----------------------------------------
Default(%) Current(%)
---------- ----------
85
Command History
The command was introduced in ArubaOS 6.2.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Total Memory (MB)
-----------------
77 679
Licensing
Base operating system
Available Memory (MB)
---------------------
Command Mode
Enable and Config mode on master and local
controllers
225
show threshold | 1287