Dell PowerConnect W-7200 Series Reference Manual page 730

show ap debug crash-info
show ap debug crash-info {ap-name <ap-name>|ip-addr <ip-addr>}
Description
Show crash log information (if it exists) for an individual AP. The stored information is cleared from the flash after
the AP reboots.
Syntax
Parameter
ap-name <ap-name>
ip-addr <ip-addr>
Example
The output of this command shows a partial sample crash log information for an AP named MyAP
(host) #show ap debug crash-info ap-name MyAP
<4>ArubaOS Version x.x.x.x (build xxxx / label #xxxx)
<4>Built by p4build@cartman on 2012-07-29 at 14:44:06 PST (gcc version x.x.x
Cavium Networks Version: 1.4.0, build 58)
<4>CVMSEG size: 2 cache lines (256 bytes)
<4>Setting flash physical map for 16MB flash at 0x1ec00000
<4>Determined physical RAM map:
<7>On node 0 totalpages: 16384
<7> DMA zone: 16384 pages, LIFO batch:3
<7> DMA32 zone: 0 pages, LIFO batch:0
<7> Normal zone: 0 pages, LIFO batch:0
<7> HighMem zone: 0 pages, LIFO batch:0
<4>Primary instruction cache 32kB, virtually tagged, 4 way, 64 sets, linesize 128 bytes.
<4>Primary data cache 16kB, 64-way, 2 sets, linesize 128 bytes.
<4>Using 500.000 MHz high precision timer. cycles_per_jiffy=1000000
<6>Memory: 56636k/65536k available (1925k kernel code, 8840k reserved, 575k data, 2716k init,
0k highmem)
<4>Calibrating delay using timer specific routine.. 1000.32 BogoMIPS (lpj=1000322)
<4> available.
<4>Checking for the multiply/shift bug... no.
<4>Checking for the daddi bug... no.
<4>Checking for the daddiu bug... no.
<5>detected lzma initramfs
<5>initramfs: LZMA lc=3,lp=0,pb=2,dictSize=8388608,origSize=15217664
<5>LZMA initramfs
Command History
Introduced in ArubaOS 5.0.
730 | show ap debug crash-info
Description
Show crash information for an AP with a specified name.
Show crash information for an AP with a specified IP address by entering an IP address in
dotted-decimal format.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide