Dell PowerConnect W-7200 Series Reference Manual page 661

show ap-name
show ap-name [<ap-name>]
Description
Show a list of AP names. Include the <ap-name> parameter to display detailed configuration information for that
AP.
Syntax
Parameter
<ap-name>
Example
This first example shows that the controller has eight registered APs. The Name column lists the names of each
registered AP. Note that APs are all user-defined, so they will not have an entry in the Profile Status column.
(host) #show ap-name
AP name List
------------
Name
----
mp3
sw-ad-ap124-11
sw-ad-ap125-13sw-ad-ap125-15sw-ad-ap125-17sw-ad-ap125-18sw-ad-ap125-19sw-ad-ap125-3
Total: 8
Include an AP name to display a complete list of configuration settings for that AP. If the AP has default settings,
the value may appear as N/A. The AP in the example below has all default profile settings.
(host) #show ap-group corp1
AP name "mp3"
-------------
Parameter
---------
Virtual AP
Excluded Virtual AP
802.11a radio profile
802.11g radio profile
Wired AP profile
Ethernet interface 0 link profile
Ethernet interface 1 link profile
AP system profile
VoIP Call Admission Control profile
802.11a Traffic Management profile
802.11g Traffic Management profile
Regulatory Domain profile
RF Optimization profile
RF Event Thresholds profile
IDS profile
Mesh Radio profile
Mesh Cluster profile
Excluded Mesh Cluster profile
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
The name of an AP.
Profile Status
--------------
Value
-----
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
show ap-name | 661