Dell PowerConnect W-7200 Series Reference Manual page 1015

show ids general-profile
show ids general-profile <profile-name>
Description
Display an IDS General profile.
Syntax
Parameter
<profile-name>
Usage Guidelines
Issue this command without the <profile-name > parameter to display the IDS General profile list. Include a profile
name to display detailed configuration information for that profile.
Examples
The example below shows that the controller has four configured General profiles.
(host) (config) # show ids general-profile
IDS General Profile List
------------------------
Name
----
default
helen
wired-lb
Wizard-test2
Total:4
In the example above, the Reference column indicates the number of references to the profile named in the Name
column. The Profile Status column is blank unless the rule is predefined.
The example below displays the settings for the profile Michael.
(host) (config) #show ids general-profile Michael
IDS General Profile "Michael"
---------------------------
Parameter
---------
Stats Update Interval
Monitored Device Stats Update Interval
AP Inactivity Timeout
Adhoc (IBSS) AP Inactivity Timeout
AP Max Unseen Timeout
Adhoc AP Max Unseen Timeout
STA Inactivity Timeout
STA Max Unseen Timeout
Min Potential AP Beacon Rate
Min Potential AP Monitor Time
Signature Quiet Time
Wireless Containment
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of an IDS General profile.
References Profile Status
---------- --------------
2
0
1
1
Value
-----
60 sec
0 sec
20 sec
5 sec
600 sec
180 sec
60 sec
600 sec
25 %
2 sec
900 sec
deauth-only
show ids general-profile | 1015