show lacp sys-id
show lacp sys-id
Description
View the LACP system MAC address and port priority.
Example
This command returns the port priority and the MAC address (comma separated). In the example below, the port
priority is the default value 32768 followed by the MAC address 00:0B:86:40:37:C0.
(Host)#show lacp sys-id
32768,00:0B:86:40:37:C0
Related Commands
Command
lacp group
lacp port-priority
show lacp
show interface port-channel
Command History
Release
ArubaOS 3.4.1
Command Information
Platform
All Platforms
1116 | show lacp sys-id
Description
Enable LACP and configure on the interface
Configure the LACP port priority
View the LACP configuration status
View information on a specified port channel interface
Modification
Command introduced
Licensing
Base operating system
Command Mode
Enable and Configuration modes (config) for
Master and Local controller
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide