Dell PowerConnect W-7200 Series Reference Manual page 953

Parameter
trace-route
dhcp
vm-mac
error
counters
esi table
exthdr
firewall-agg-sess
counters
fqdn
frame counters
ap-name <ap-name>
ip-addr <ip-address>
hardware
internal
dir <dir>
file <file>
ip-fragment-table
ipv4
ipv6
counters
statistics
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Route cache tracing statistics are displayed.
Datapath DHCP -related information.
Datapath of the VM to host client mac
Datapath error statistic errors.
Show datapath errors including SUM, CPU, Addr and description information.
Displays the contents of the datapath ESI server table entries including server, IP,
MAC, destination, VLAN, type, session and flag information.
Displays the datapath default IPv6 Extended Header Map.
Displays the datapath firewall aggregated sessions table.
Displays the datapath aggregate session statistics.
Displays datapath FQDN entries.
Displays frame statistics that are received and transmitted from the data path of the
controller.
Several output fields include the following descriptions:
Descr failures-This is the number of times a packet descriptor was not
l
available and the packet dropped.
Dot1QDiscards-The number of packets received on a trunk port where the
l
VLAN presented did not match any configured on the controller and the packet
dropped.
Dot1d Discards-Spanning tree is disabled and each BPDU frame is counted
l
and dropped.
Denied Frames-Frames that are denied by the ACL's data path of the controller.
l
Name of the AP.
IP address of the AP.
Displays datapath hardware counters and hardware packet statistics information.
Internal details are displayed.
Hardware directory
File in the directory.
Displays ip-fragment statistics including CPU, current entries, high water mark,
max , total, and aged entries.
Displays IPv4 fragment statistics.
Displays IPv6 fragment statistics.
Hardware counters.
Hardware packet statistics.
show datapath | 953