Dell PowerConnect W-7200 Series Reference Manual page 478

pkt-trace-global
pkt-trace-global {enable|disable} [trace-mask <tmask>]
Description
Enable global packet tracing in the datapath. Use this feature only under the supervision of Dell technical support.
Syntax
Parameter
<acl-name>
enable
disable
tracemask <tmask>
Example
The following command enables the global packet tracing for all traffic.
(host) (config) #pkt-trace-global enable
Command History
This command was introduced in ArubaOS 3.4.
Command Information
Platforms
All platforms
policer-profile (deprecated)
policer-profile <profile-name>
cbs {k | m | g}
cir <cir>
clone <source>
ebs [k | m | g]
exceed-action drop | permit | remark
exceed-profile <policerProfile>
no..
violate-action drop | permit
violate-profile <profile-name>
478 | pkt-trace-global
Description
Enable packet tracing for the specified access-control list.
Enable global packet tracing for the ACL.
Disable global packet tracing for the ACL.
Specify a trace mask. Use this feature only under the supervision of Dell technical support.
Licensing
Base operating system
Command Mode
Enable mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide