Dell PowerConnect W-7200 Series Reference Manual page 501

remote-node-localip
localuserdb
remote-node-localip <remote-node-switch-ip> ipsec KEY <keyword>
Description
This command configures the switch-IP address and preshared key for the local Remote Node on a master Remote
Node.
Syntax
Parameter
<remote-node-switch-
ip>
ipsec <keyword>
Usage Guidelines
Use this command on a master remote node to configure the switch-IP address and preshared key for
communication with a local remote node. On the local remote node, the pre-shared key is configured in the setup
wizard during the initial boot. The pre-shared keys for both the master and local controllers must match.
On the local remote node, use the remote-node-masterip command to configure the switch-IP address and preshared
key for the master remote node.
Example
The following command configures the local remote node on a master remote node:
(host) (config) remote-node-localip 172.16.0.254 ipsec rhyopevs
Command History
Introduced in ArubaOS 6.0
Command Information
Platform
Available on all platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Switch-IP address of the local remote node. Use the 0.0.0.0 address to configure a global
preshared key for all inter-controller communications.
Preshared key, which must be between 6-64 characters.
License
Available in the base operating system
Command Mode
Config mode on master controllers
remote-node-localip | 501