Dell PowerConnect W-7200 Series Reference Manual page 882

Column
Signal Strength
Duty Cycle
Center Freq
Start Freq
End Freq
Channels affected
Bandwidth
Related Commands
Command
ap spectrum local-override
rf dot11a-radio-profilemodespectrum-
mode
rf dot11g-radio-profilemodespectrum-
mode
Command History
Introduced in ArubaOS 6.0.
Command Information
Platforms
All platforms
882 | show ap spectrum device-log
Description
Strength of the signal sent by the device.
Device duty cycle. This value represents the percent of time a signal is broadcast on a
specific channel or frequency.
Center frequency of the signal sent by the device.
Lowest signal frequency sent by the device.
Highest signal frequency sent by the device.
Radio channels affected by the device signal.
Amount of signal bandwidth used by the device, in kilohertz.
Description
Convert an AP or AM into a spectrum
monitor by adding it to the spectrum local-
override list.
Set a 802.11a radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Set a 802.11g radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Licensing
Base operating system
Mode
Config mode on master or local
controllers
Config mode on master or local
controllers
Config mode on master or local
controllers
Command Mode
Enable or Config mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide