Dell PowerConnect W-7200 Series Reference Manual page 1260

show session-acl-list
show session-acl-list
Description
Displays the list of configured session ACLs in the controller.
Syntax
No parameters.
Example
The output of this command shows the session ACLs in the controller.
(host) # show session-access-list
v6-icmp-acl
allow-diskservices
control
validuser
v6-https-acl
vocera-acl
icmp-acl
v6-dhcp-acl
captiveportal
v6-dns-acl
allowall
test
sip-acl
https-acl
...
...
...
v6-http-acl
dhcp-acl
http-acl
stateful-dot1x
ap-acl
svp-acl
noe-acl
stateful-kerberos
v6-logon-control
h323-acl
Command History
This command was available in ArubaOS 3.4
Command Information
Platforms
All platforms
1260 | show session-acl-list
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide