Dell PowerConnect W-7200 Series Reference Manual page 1313

show voice call-cdrs
show voice call-cdrs [bssid <value> | cid <value> | count <number> | detail | essid <value> |
extn <value> | ip <ip-address> | proto {sip | svp | noe | sccp | vocera | h323} | rtpa | sta
<mac-address>]
Description
Displays detailed call records of voice client.
Syntax
Parameter
bssid
cid
count
detail
essid
extn
ip
proto
rtpa
sta
Example
The output of this command shows detailed call records filtered by SIP protocol and limited to 5 entries.
(host) #show voice call-cdrs proto sip count 5 detail
Voice Client(s) CDRs (Detail)
-----------------------------
CDR Id Client IP
time R-value
Initial-ESSID
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Filter records based on BSSID of voice clients.
View the detailed records filtered on the CDR Id.
Specify the number of records to be displayed by entering a number.
Include this parameter to view the following additional information for each call
record.
Reason
l
Codec
l
Band
l
Setup Time (sec)
l
Re-Assoc
l
Initial-BSSID
l
Initial-ESSID
l
Initial-AP Name
l
Filter records based on ESSID of voice clients.
View detailed records for a particular extension number.
View detailed records of voice client using its IP address.
View detailed records filtered on protocol.
Include this parameter to view the voice call quality reports based on the call quality
analysis from the RTP media streams.
NOTE: This parameter is applicable only if Real Time Call Quality Analysis is enabled
on the voice calls.
View the detailed records filtered on the MAC address of a voice client.
Client Name ALG
Reason Codec
Initial-AP Name
Dir Called/Calling Party
Band Setup Time(sec)
Status Dur(sec)
Re-Assoc Initial-BSSID
show voice call-cdrs | 1313
Orig