show poe
show poe [slot/port]
Description
Displays the PoE status of all or a specific port on the controller.
Syntax
No parameters.
Example
The output of this command shows the PoE status of port 10 in slot 1.
(host) # show poe 1/10
PoE Status
----------
Port
Status
----
------
FE 1/10
Off
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms
All platforms
show policer-profile (deprecated)
show policer-profile <profile-name>
Description
Displays the policer profile configuration.
Command History
This command was deprecated in ArubaOS 6.2.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Voltage(mV)
Current(mA)
-----------
-----------
N/A
N/A
Licensing
Base operating system
Power (mW)
----------
N/A
Command Mode
Config or Enable mode on master or local
controllers
show poe | 1179