Dell PowerConnect W-7200 Series Reference Manual page 789

show ap mesh debug forwarding-table
show ap mesh forwarding-table {ap-name <ap-name>}|{ip-addr <ip-addr>}
Description
Show the forwarding table for a remote mesh point or remote mesh portal.
Syntax
Parameter
ap-name <ap-name>
ip-addr <ip-addr>
Usage Guidelines
This is an internal technical support command. Dell technical support may request that you issue this command to
help analyze and troubleshoot problems with your mesh network.
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show data for a remote mesh node with a specific name.
Show data for a remote mesh node with a specific IP address by entering its IP address in
dotted-decimal format.
Licensing
This show command is available in
the base operating system.
Commands to configure the mesh
feature require the Mesh license.
Command Mode
Enable or Config mode on master controllers
show ap mesh debug forwarding-table | 789