Dell PowerConnect W-7200 Series Reference Manual page 999

Column
LMS Seq
Activity
Status
Msg in Prog
Msg Len
Attempts
Command History
This command is introduced in Dell PowerConnect W-Series ArubaOS 6.2.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
The sequence number used by the LMS to sync up with the master controller.This tracks the
number of times the LMS has communicated with the master controller.
The time at which the last activity happened on the LMS.
Indicates if the status of the LMS is up or down.
Indicates if an active communication is happening between the LMS and the master controller.
It can be Yes or No. If it is yes, then the Msg Len and Attempt fields are set.
The length of the message that the master controller is syncing with the LMS.
Number of times the master controller has attempted to sync with the LMS.
Licensing
Base operating system
Command Mode
Enable or Config mode on master controllers.
show gap-debug | 999