Usage Guidelines - Dell PowerConnect W-7200 Series Reference Manual

show ap debug client-table
show ap debug client-table [ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>]
Description
Show clients associated to an AP.
Syntax
Parameter
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>

Usage Guidelines

The Tx_Rate, Rx_Rate, Last_ACK_SNR, and Last_Rx_SNR columns shown in the output of this command display
valuable troubleshooting information for clients trying to connect to a specific AP. Use this command to verify that
the transmit (Tx_Rate) and receive (Rx_Rate) rates are not too low, and that the signal-to-noise (SNR) ratio is
acceptable.
Examples
The example below shows part of the AP configuration table for a specific BSSID. Additional parameters not
displayed are described in the table below.
(host) #show ap debug client-table ap-name AP12
MAC
---
Tx_Pkts Rx_Pkts
------- -------
00:17:f2:4d:01:e2 wpa2
31463 22821
00:14:a4:25:72:6d wpa2
24691 45215
00:19:7e:66:89:38 wpa2
7031 24739
00:16:cf:bc:0e:ce wpa2
3920 14797
00:19:7d:d6:74:93 wpa2
2530 8034
UAPSD:(VO,VI,BK,BE,Max SP,Q Len)
HT Flags: A - LDPC Coding; W - 40Mhz; S - Short GI; M - Max A-MSDU
D - Delayed BA; G - Greenfield; R - Dynamic SM PS
Q - Static SM PS; N - A-MPDU disabled
The output of this command includes the following information:
726 | show ap debug client-table
Description
Filter the AP Config table by AP name.
Filter the AP Config table by BSSID. The Basic Service Set Identifier (BSSID) is usually the
AP's MAC address.
Filter the AP Config table by IP address by entering an IP address in dotted-decimal format.
ESSID BSSID
----- -----
PS_Qlen Tx_Retr
------- -------
00:1a:1e:11:5f:11 Associated
0 4289
00:1a:1e:11:5f:11 Associated
0 944
00:1a:1e:11:5f:11 Associated
0 671
00:1a:1e:11:5f:11 Associated
0 286
00:1a:1e:11:5f:11 Associated
0 365
Assoc_State HT_State AID
----------- -------- ---
None 0x1
None 0x2
None 0x4
None 0x5
None 0x7
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
PS_State UAPSD
-------- -----
Awake (0,0,0,0,N/A,0)
Awake (0,0,0,0,N/A,0)
Awake (0,0,0,0,N/A,0)
Awake (0,0,0,0,N/A,0)
Awake (0,0,0,0,N/A,0)