Dell PowerConnect W-7200 Series Reference Manual page 687

show ap bw-report
show ap bw-report {ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>}
Description
Show the bandwidth reporting table for a specific AP.
Syntax
Parameter
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
Examples
The output of the following command shows the Dell AP bandwidth table for an AP with the IP address
192.0.2.170.
show ap bw-report ip-addr 192.0.2.170
Bandwidth report for AP "AL16" radio 0
--------------------------------------
Virtual AP
----------
corp1344-guest
corp1344-ethersphere-wpa2
Average Throughput:0 kbps
Bandwidth report for AP "AL16" radio 1
--------------------------------------
Virtual AP
----------
corp1344-guest
corp1344-ethersphere-voip
corp1344-ethersphere-vocera
Average Throughput:0 kbps
The output of this command includes the following information for all radios on the AP:
Column
Virtual AP
Allocated Share
Actual Share
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show bandwidth data for an AP with a specific name.
Show bandwidth data for a specific Basic Service Set Identifier (BSSID) on an AP. The
Basic Service Set Identifier (BSSID) is usually the AP's MAC address.
Show bandwidth data for an AP with a specific IP address by entering an IP address in
dotted-decimal format.
Allocated Share Actual Share
--------------- ------------
0% 0%
0% 0%
Allocated Share
---------------
0%
0%
0%
Description
Name of a Virtual AP
Maximum percentage of total bandwidth available to that Virtual AP.
Actual percentage of total bandwidth used by a Virtual AP.
Offered Load
------------
0 kbps
0 kbps
Actual Share Offered Load
------------ ------------
0% 0 kbps
0% 0 kbps
0% 0 kbps
Delivered Load
--------------
0 kbps
0 kbps
Delivered Load
--------------
0 kbps
0 kbps
0 kbps
show ap bw-report | 687