Show Netdestination - Dell PowerConnect W-7200 Series Reference Manual

show netdestination

show netdestination <netdestination name>
Description
Displays IPv4 and IPv6 network destination information.
Syntax
No parameters.
Example
Issue this command to display all netdestination configured on this controller. The output below displays
information for all configured IPv4 and IPv6 netdestinations. To display additional detailed information for an
individual netdestinations, include the name of the netdestination at the end of the command.
(host) >enable
Password:******
(host) #show netdestination
Name: white-list
Position Type
-------- ----
Name: localnetwork
Position Type
-------- ----
1 network
The output includes the following parameters:
Parameter
Name
Position
Type
IP addr
Mask/Range
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
IP addr Mask-Len/Range
------- --------------
IP addr Mask-Len/Range
------- --------------
0.0.0.2 0.0.0.0
Description
Network destination name
Network destination position
Network destination type
IP address of the network destination
Network destination subnet mask and range
Licensing
You must have a PEFNG license to
configure or view a netdestination.
Command Mode
Enable or config mode on master controllers
show netdestination | 1161