Dell PowerConnect W-7200 Series Reference Manual page 810

show ap monitor association
show ap monitor association {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>} <ap-
bssid>
Description
Show the association table for an Air Monitor (AM).
Syntax
Parameter
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
<ap-bssid>
Examples
The output of the command lists the MAC addresses associated with the Air Monitor BSSID.
(host) #show ap monitor association ap-name ap9 00:1a:1e:11:74:a1
Association Table
-----------------
mac
---
00:1d:d9:01:c4:50
00:17:f2:4d:01:e2
00:1f:3b:8c:28:89
00:1d:d9:05:05:d0
00:14:a4:25:72:6d
00:19:7d:d6:74:8d
The output of this command includes the following information:
Column
mac
rsta-type
auth
phy-type
810 | show ap monitor association
Description
Show data for an AM with a specific name.
Show data for an AM with a specific Basic Service Set Identifier (BSSID). The Basic
Service Set Identifier (BSSID) is usually the AM's MAC address.
Show data for an AM with a specific IP address by entering its IP address in dotted-
decimal format.
BSSID of an AP.
rsta-type auth phy-type
--------- ---- --------
valid yes 80211a
valid yes 80211a
valid yes 80211a
valid yes 80211a
valid yes 80211a
valid yes 80211a
Description
MAC address associated with the Air Monitor BSSID
Rogue station type:
interfering: Interfering station.
l
valid: Station is not a rogue station.
l
DoS: Station may have attempted a DoS attack.
l
Displays a yes if the client has been authenticated.
The RF band in which the AP should operate:
802.11g = 2.4 GHz
802.11a = 5 GHz
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide