Dell PowerConnect W-7200 Series Reference Manual page 648

show acl acl-table
show acl acl-table <1-2700>
Description
Display information for a specified access control list (ACL).
Syntax
Parameter
acl-table <1-2700>
Example
The following example displays the ACL table for the controller.
(host) #show acl acl-table acl 1
AclTable
--------
ACL Type ACE Index
--- ---- ---------
1 role 1459
Total free ACE entries = 3591
Free ACE entries at the bottom = 2552
Next ACE entry to use = 1480 (table 1)
Ace entries reused 622 times
ACL count 64, tunnel acl 0
Ace entries reused 373 times
ACL count 64, tunnel acl 0
The output of this command displays the following parameters:
Parameter
ACL
Type
ACE Index
648 | show acl acl-table
Description
Specify the number of the ACL for which you want to view information.
Ace Count Name Applied
--------- ---- -------
18 logon 0
Description
Number of the specified ACL
Shows the ACL type:
role: Access list is used to define a user role.
l
mac: MAC ACLs allow filtering of non-IP traffic. This ACL filters on a specific source
l
MAC address or range of MAC addresses.
session: Session ACLs define traffic and firewall policies on the controller.
l
ether-type: This type of ACL filters on the Ethertype field in the Ethernet frame
l
header, and is useful when filtering non-IP traffic on a physical port.
standard: Standard ACLs are supported for compatibility with router software from
l
other vendors. This ACL permits or denies traffic based on the source address of the
packet.
Starting index entry for the ACL's access control entries
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide