Dell PowerConnect W-7200 Series Reference Manual page 1031

Arubaos 6.2
Hide thumbs Also See for PowerConnect W-7200 Series:
Table of Contents

Advertisement

Parameter
Rogue AP Classification
Overlay Rogue AP Classification
Valid Wired MACs
Allow Well Known MAC
Rogue Containment
Suspected Rogue Containment
Suspected Rogue Containment
Confidence Level
Protect Valid Stations
Detect Bad WEP
Detect Misconfigured AP
Protect Misconfigured AP
Detect Valid SSID Misuse
Protect SSID
Privacy
Require WPA
Valid 802.11g channel for policy
enforcement
Valid 802.11a channel for policy
enforcement
Valid MAC OUIs
Valid and Protected SSIDs
Protect 802.11n High Throughput
Devices
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Shows if the profile has enabled or disabled rogue AP classification.
Shows if the controller allows APs that are plugged into the wired
side of the network to be classified as "suspected rogue" instead of
"rogue".
List of valid and protected SSIDs.
Shows if the profile allows devices with known MAC addresses to
classify
rogue APs.
Shows if the controller will automatically shut down rogue APs.
Shows if the controller will automatically treat suspected rogue APs
as interfering APs.
Confidence level of suspected Rogue AP to trigger containment,
expressed as a percentage.
Shows if the controller will allow valid stations to connect to a non-
valid AP.
Shows if the profile has enabled or disabled detection of WEP
initialization vectors that are known to be weak and/or repeating.
Shows if the profile has enabled or disabled detection of
misconfigured APs.
Shows if the profile has enabled or disabled protection of
misconfigured APs.
Shows if the detect valid SSID minuse is enabled (true) or disabled
(false).
Shows if the profile has enabled or disabled use of SSID by valid APs
only.
Shows if the profile has enabled or disabled encryption as a valid AP
configuration.
Shows if the controller will flag any valid AP not using WPA as a
misconfigured AP.
A list of valid 802.1b/g channels that third-party APs are allowed to
use.
A list of valid 802.11a channels that third-party APs are allowed to use.
A list of valid MAC Organizationally Unique Identifiers (OUIs).
A list of valid and protected SSIDs.
Shows if the profile enables or disables protection of high-throughput
(802.11n) devices.
show ids unauthorized-device-profile | 1031

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powerconnect w-series

Table of Contents