Dell PowerConnect W-7200 Series Reference Manual page 1200

show profile-list wlan
show profile-list wlan [ dotllk-profile | edca-parameters-profile | ht-ssid-profile |
ssid-profile | traffic-management-profile | virtual-ap | voip-cac-profile | wmm-traffic-
management-profile]
Description
Displays the status of WLAN profiles on the controller.
Syntax
Parameter
dot11k-profile
edca-parameters-profile
ht-ssid-profile
traffic-management-profile
virtual-ap
voip-cac-profile
wmm-traffic-management-
profile
Example
The output of this command shows that the controller has a single ARM profile, "default".
(host) # show profile-list rf arm-profile
Adaptive Radio Management (ARM) profile List
--------------------------------------------
Name References
---- ----------
default 2
Total:1
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms
All platforms
1200 | show profile-list wlan
Description
Show a list of all 802.11K Profiles
Show a list of all enhanced distributed channel access (EDCA) profile for APs or
for clients (stations)
Show a list of all high-throughput SSID profile.s
Show a list of all traffic management profiles.
Show a list of all the virtual AP profiles.
Show a list of all voice over IP (VoIP) call admission control (CAC) profiles
Show a list of all WMM traffic management profiles.
Profile Status
--------------
Licensing
Base operating system
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide