Dell PowerConnect W-7200 Series Reference Manual page 1021

show ids profile
show ids profile <profile-name>
Description
Display all ids profiles or display a specific profile name.
Syntax
Parameter
<profile-name>
Usage Guidelines
Issue this command without the <profile-name > parameter to display the list of IDS profiles. Include a profile
name to display detailed information for that profile.
Examples
The example below shows that the controller has seven configured IDS Profiles.
(host) (config) #show ids profile
IDS Profile List
----------------
Name
----
default
test
test-tarpit
test-wired-lb
test1
Wizard-test
Wizard-test2
Total:7
In the example above, the Reference column indicates the number of references to the profile named in the Name
column. The Profile Status column is blank unless the rule is predefined.
This example displays the configuration settings for the profile test1.
(host) (config) #show ids profile test1
IDS Profile "test1"
-------------------
Parameter
---------
IDS General profile
IDS Signature Matching profile
IDS DOS profile
IDS Impersonation profile
IDS Unauthorized Device profile
The output of this command includes the following parameters:
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of an IDS profile.
References Profile Status
---------- --------------
5
0
1
0
0
0
0
Value
-----
test1
test1
test1
test1
test1
show ids profile | 1021