Dell PowerConnect W-7200 Series Reference Manual page 1000

show gateway health-check
show gateway health-check
Description
Display the current status of the gateway health-check feature.
Syntax
No parameters.
Usage Guidelines
The gateway health check feature can only be enabled by Dell Technical Support.
Example
This example below shows that the gateway health-check feature has not been enabled on the controller.
(host) #show gateway health-check
Gateway health check not enabled
Related Commands
Command
gateway health-check disable
Command History
This command was introduced in ArubaOS 3.4.
Command Information
Platforms
All platforms
1000 | show gateway health-check
Description
Disable the gateway health check
Licensing
Base operating system
Command Mode
Enable and Config mode on master or local controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Mode
Config mode