Dell PowerConnect W-7200 Series Reference Manual page 1001

show global-user-table count
show global-user-table
show global-user-table count
[current-switch] <IP address>
[authentication-method] {dot1x | mac | stateful-dot1x | vpn | web}
[role] <role name>
[bssid] <bssid MAC>
[essid] <essid>
[ap-name] <AP name>
[phy-type] {a | b | g}
[age] <starting time dd:hh:mm> <ending time dd:hh:mm>
Description
This command displays a count of global user based on the specified criteria.
Syntax
Parameter
current-switch
authentication-
method
role
bssid
essid
ap-name
phy-type
age
Example
Issue this command to display a global user count. The output shown below is a result of the command show global-
user-table count current-switch <ip-address>.
Complete results.
The number of global users : 2
The output includes the following parameters:
Parameter
The number of global
users:
Command History
This command was introduced in ArubaOS 3.4.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Match IP address of the switch where the user is currently associated
Count users matching the specified authentication method
Count users matching the specified role
Count users matching the specified BSSID
Count users matching the specified ESSID. If the ESSID includes spaces, you must enclose
it in quotation marks.
Count users matching the specified AP name
Count users matching the specified Phy type
Count users matching the specified age
Description
Total number of global users meeting the specified criteria.
show global-user-table count | 1001