Dell PowerConnect W-7200 Series Reference Manual page 839

show ap remote debug association
show ap remote debug association [ap-name <ap-name>|bssid <bssid>|ip-addr <ip-addr>]
Description
Show the association table of the AP to identify the clients associated to each AP.
Syntax
Parameter
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
Usage Guidelines
Use this command to verify if a remote user is connected to an AP, and to validate the AP to which is connected.
Example
The output of this command displays information about the remote clients associated with an AP with the IP
address 192.0.2.32.
(host) #show ap remote debug association ip-addr 192.0.2.32
Flags: W: WMM client, A: Active, R: RRM client
PHY Details: HT: High throughput; 20: 20MHz; 40: 40MHz
Association Table
-----------------
Name bssid
---- -----
AP71 00:0a:23:c1:d4:11
vlan-id tunnel-id
------- ---------
111 0x108e
Num Clients:1
The output of this command includes the following information:
Column
Name
bssid
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show client associations for a specific AP name.
Show client associations for an specific AP Basic Service Set Identifier (BSSID). The BSSID
is usually the AP's MAC address.
Show client associations for an AP with a specific IP address. Enter the IP address in
dotted-decimal format.
<n>ss: <n> spatial streams
mac
---
00:16:6d:08:1s:f1
phy assoc. time
--- -----------
a 23s
Description
Name of an AP.
The AP Basic Service Set Identifier (BSSID).
auth assoc aid
---- ----- ---
y y 1
num assoc Flags
--------- -----
1 A
l-int essid
----- -----
10 t-lab
show ap remote debug association | 839