Dell PowerConnect W-7200 Series Reference Manual page 987

Column
Name
Trusted IP
Untrusted IP
Trusted s/p
Untrusted s/p
Group
Mode
Nat Port
ID
Flags
Related Commands
Platforms
esi server
Command History
This command was introduced in ArubaOS 2.5.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of the ESI server.
Displays the server IP address on the trusted network. As an option, you can also enable a
health check on the specified address
Displays the server IP address on the untrusted network. As an option, you can also enable a
health check on the specified address
Shows the slot and port connected to the trusted side of the ESI server; slot/port format.
Shows the slot and port connected to the untrusted side of the ESI server.
Name of the ESI group to which this server is assigned. If the server has not yet been assigned
to a group, this column will be blank.
Specifies the ESI server mode of operation: bridge, nat, or route
Displays the NAT destination TCP/UDP port.
ID number assigned to the server when it was first defined.
This data column displays any flags associated with this server. The flag key appears below the
ESI Server Table.
Licensing
This command configures an ESI server.
Licensing
Base operating system
Command Mode
Config mode on master or local controllers.
Command Mode
Enable and Config mode on master or local controllers.
show esi servers | 987