Dell PowerConnect W-7200 Series Reference Manual page 762

show ap enet-link-profile
show ap enet-link-profile [<profile>]
Description
Show a list of all Ethernet Link profiles.
Usage Guidelines
Include a profile name to display details for the specified Ethernet Link Profile, or omit the <profile> parameter to
display a list of all Ethernet Link profiles.
Example
This command shows the speed of the Ethernet interface and the current duplex mode for the Ethernet Link profile
"default":
(host) #show ap enet-link-profile default
AP Ethernet Link profile "default"
----------------------------------
Parameter Value
--------- -----
Speed auto
Duplex auto
The output of this command includes the following parameters:
Parameter
Speed
Duplex
Related Commands
Command
ap enet-link-profile
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
762 | show ap enet-link-profile
Description
The speed of the Ethernet interface. This value can be either 10 Mbps, 100
Mbps, 1000Mbps (1 Gbps), or auto (auto-negotiated).
The duplex mode of the AP's Ethernet interface. This value can be either full,
half, or auto (auto-negotiated).
Description
This command configures an AP Ethernet link profile.
Licensing
Base operating system
Mode
Config mode
Command Mode
Enable or Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide