Table of Contents
Advertisement
Parameter
VoIP Call Admission Control
VoIP Bandwidth based CAC
VoIP Call Capacity
VoIP Bandwidth Capacity (kbps)
VoIP Call Handoff Reservation
VoIP Send SIP 100 Trying
VoIP Disconnect Extra Call
VOIP TSPEC Enforcement
VOIP TSPEC Enforcement Period
VoIP Drop SIP Invite and send status
code (client)
VoIP Drop SIP Invite and send status
code (server)
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
1380 | show wlan voip-cac-profile
Licensing
Base operating system
Description
Shows if the profile enables or disables WiFi VoIP Call
Admission Control features.
Shows the desired call admission control (CAC) Mechanism:
Disable - CAC is based on Call Counts
l
Enable - CAC should be based on Bandwidth.
l
Number of simultaneous calls that can be handled by one
radio.
The maximum bandwidth that can be handled by one radio, in
kbps.
Percentage of call capacity reserved for mobile VoIP clients on
call.
Shows if the profile enables or disables sending of SIP 100 -
trying messages to a call originator to indicate that the call is
proceeding.
If enabled, the controller disconnects calls that exceed the high
capacity threshold by sending a deauthentication frame.
Shows if the profile enables or disables validation of TSPEC
requests for CAC.
Maximum time for the station to start the call after the TSPEC
request
Display the status code sent back to the client if the profile is
configured to drop a SIP Invite:
480: Temporary Unavailable
l
486: Busy Here
l
503: Ser vice Unavailable
l
none: Don't send SIP status code
l
Display the status code sent back to the server if the profile is
configured to drop a SIP Invite:
480: Temporary Unavailable
l
486: Busy Here
l
503: Ser vice Unavailable
l
none: Don't send SIP status code
l
Command Mode
Enable and Config mode on master or local controllers.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Advertisement
Table of Contents
