Dell PowerConnect W-7200 Series Reference Manual page 694

Parameter
Keepalive Interval
Dump Server
Telnet
SNMP sysContact
AeroScout RTLS Server
RTLS Server configuration
Remote-AP DHCP Server VLAN
Remote-AP DHCP Server Id
Remote-AP DHCP Default Router
Remote-AP DHCP Pool Start
Remote-AP DHCP Pool End
Remote-AP DHCP Pool Netmask
Remote-AP DHCP Lease Time
Remote-AP uplink total bandwidth
Remote-AP bw reservation
Heartbeat DSCP
Session ACL
Maintenance Mode
Remote-AP Local Network Access
Radio enable
Mode
694 | show ap config
Description
Time, in seconds, between keepalive messages from the AP
(For debugging purposes.) Displays the server to receive the
core dump generated if an AP process crashes.
Reports whether telnet access the AP is enabled or
disabled.
SNMP system contact information.
Displays whether or not the AP will send RFID tag
information to an AeroScout real-time asset location (RTLS)
server.
Displays whether or not the AP will send RFID tag
information to an RTLS server.
Shows the VLAN ID of the remote-AP DHCP server used
when controller is unreachable.
Shows the IP Address of the DHCP DNS Server.
Shows the IP Address of the DHCP Default Router.
Shows the IP Address used as start of DHCP Pool.
Shows the IP Address used as end of DHCP Pool.
Shows the netmask of DHCP Pool.
Shows the length of leases, in days (0 means infinite).
This is the total reserved uplink bandwidth (in Kilobits per
second)
Session ACLs with uplink bandwidth reservation in kilobits
per second. You can specify up to three session ACLs to
reserve uplink bandwidth.
DSCP value of AP heartbeats (0-63).
Shows the access control list (ACL) applied on the uplink of
a remote AP.
Shows if Maintenance mode is enabled or disabled. If
enabled, APs stop flooding unnecessary traps and syslog
messages to network management systems or network
operations centers when deploying, maintaining, or
upgrading the network. The controller still generates debug
syslog messages if debug logging is enabled.
Enable or disable local network access across VLANs in a
Remote-AP.
Shows if the AP's radio is enabled or disabled.
Shows the operating modes for the AP.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide