Table of Contents
Advertisement
show ap radio-database
show ap radio-database [band a|g] [group <group>] [mode access-point|air-
monitor|disabled|ht|ht-40mhz|legacy|sap-monitor] [sort-by ap-group|ap-ip|ap-name|ap-
type|switch-ip] [sort-direction ascending|descending] [start <start>] [switch <switch-ip-
addr>]
Description
Show radio information for Access Points visible to this controller.
Syntax
Parameter
band
a
g
group <group>
mode
access-point
air-monitor
disabled
ht
ht-40mhz
legacy
sap-monitor
sort-by
ap-group
ap-ip
ap-name
ap-type
switch-ip
sort-direction
ascending
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show only APs with a radio operating in the specified band.
Show only APs with a radio operating in the 802.11a band (5 GHz).
Show only APs with a radio operating in the 802.11g band (2.4 GHz).
Show only APs associated with the specified AP group
Show only APs with a radio operating in the specified mode.
Show only APs operating as access points
Show only APs operating as air monitors.
Show only disabled APs.
Show only high-throughput APs.
Show only 40 Mhz high-throughput APs
Show only legacy (not high-throughput) APs.
Show only APs operating as SAP monitors
Sort the output of this command by a specific data column
Sort the output of this command by AP group name
Sort the output of this command by AP IP address
Sort the output of this command by AP name
Sort the output of this command by AP model type.
Sort the output of this command by controller ip address
Select a sort direction for the output of this command
Sort the output in ascending order.
show ap radio-database | 831
Advertisement
Table of Contents
