Table of Contents
Advertisement
show log user-debug
show log user-debug{[<number>][all]}
Description
Show the controller's user debug logs.
Syntax
Parameter
<number>
all
Example
This example shows the controller's last ten user debug logs.
(host) #show log user-debug 10
Mar 5 13:57:24 :501090:
00:0b:86:a2:e7:40-1.1.1 SSID
Mar 5 13:57:24 :501090:
00:0b:86:a2:e7:41-1.1.1 SSID
Mar 5 13:58:26 :501082:
00:0b:86:a2:e7:40-1.1.1
Mar 5 13:58:26 :501085:
00:0b:86:a2:e7:40-1.1.1 SSID
Mar 5 13:58:26 :501090:
00:0b:86:a2:e7:40-1.1.1 SSID
Mar 5 13:58:26 :501090:
00:0b:86:a2:e7:41-1.1.1 SSID
Mar 5 13:58:27 :501082:
00:0b:86:a2:e7:40-1.1.1
Mar 5 13:58:27 :501085:
00:0b:86:a2:e7:40-1.1.1 SSID
Mar 5 13:58:27 :501090:
00:0b:86:a2:e7:40-1.1.1 SSID
Mar 5 13:58:27 :501090:
00:0b:86:a2:e7:41-1.1.1 SSID
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms
All platforms
1144 | show log user-debug
Description
Start displaying the log output from the specified number of lines from the end of the log.
Shows all the user debug logs for the controller.
<DBUG> |stm|
Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-
<DBUG> |stm|
Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-
<DBUG> |stm|
Probe request: 00:18:f8:ab:77:a4: AP 10.3.49.253-
<DBUG> |stm|
Probe request: 00:18:f8:ab:77:a4: AP 10.3.49.253-
<DBUG> |stm|
Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-
<DBUG> |stm|
Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-
<DBUG> |stm|
Probe request: 00:18:f8:ab:77:a4: AP 10.3.49.253-
<DBUG> |stm|
Probe request: 00:18:f8:ab:77:a4: AP 10.3.49.253-
<DBUG> |stm|
Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-
<DBUG> |stm|
Probe response: 00:18:f8:ab:77:a4: AP 10.3.49.253-
Licensing
Base operating system
Command Mode
Available in Enable and Config modes.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Advertisement
Table of Contents
