Dell PowerConnect W-7200 Series Reference Manual page 1088

Static Buffer Size
The output of this command includes the following data columns:
Parameter
Tx Msg
Tx Blk
Tx Ret
Tx Fail
Rx Ack
Rx Msg
Rx Drop
Rx Err
Tx Ack
Allocated Buffers
Static Buffers
Static Buffer Size
Command History
This command was available in ArubaOS 1.0.
Command Information
Platforms
All platforms
1088 | show ipc statistics app-ap
1444
Description
Number of transmitted messages.
Number of blocking messages transmitted.
Number of transmitted messages that were returned.
Number of failure messages that were transmitted.
Number of received acknowledgements.
Number of received messages.
Number of received messages that were dropped.
Number of received messages with errors.
Number of transmitted acknowledgements.
Number of allocated buffers for IPC messages.
Number of static buffers for IPC messages.
Size of the static buffer.
Licensing
Base operating system
Command Mode
Enable and Config mode on local and master
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide