Dell PowerConnect W-7200 Series Reference Manual page 820

Column
cur-signal
old-cur-signal
ht-type
primary-channel
sec-channel
gf-supported
40mhz-intolerance
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
820 | show ap monitor stats
Description
NOTE: This value is updated only if 'handoff-assist' is enabled in the AP's RF Optimization
profile.
The Receive Signal Strength Indicator (RSSI) of the most recent frame received from the
specified MAC address.
The most recent Receive Signal Strength Indicator (RSSI) of the MAC which is 3 lower or 5
higher than the current RSSI.
NOTE: This value is updated only if 'handoff-assist' is enabled in the AP's RF Optimization
profile
This parameter indicates support for the following HT types:
no: No support for high-throughput.
HT-20: Support for 20 Mhz high-throughput only.
HT-40: Support for 40 Mhz high-throughput.
Primary radio channel.
Secondary radio channel
If 1, this AP supports greenfield mode. If 0, greenfield is not supported.
Indicates whether the specified MAC address is 40 Mhz intolerant.
Licensing
Base operating system
Command Mode
Enable or Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide