Dell PowerConnect W-7200 Series Reference Manual page 814

WMS on Master
Stats Update Interval
Poll Interval
Num Switches
Collect Stats
WLAN Interface Switch Status
-----------------------------
Bssid
ack
-----
---
00:1a:1e:11:5f:10
3322965
00:1a:1e:11:5f:00
3322965
RTLS configuration
-------------------
Type Server IP
---- ---------
MMS 102.0.2.19
Aeroscout 192.0.2.199
RTLS 192.0.2.19
The output of this command includes the following information:
Column
bssid
scan
monitor
probe-type
task
channel
pkts
mac
ip
gw-ip
gw-mac
814 | show ap monitor debug
disabled
60
174000
1
enabled
Type Status Last-reg
---- ------ --------
local up 3321891
local up 3321891
Port Frequency
---- ---------
8000 N/A
5050 30
Description
The Basic Service Set Identifier (BSSID) for the AP. This is usually the AP's MAC address.
Indicates whether or not if active scanning is enabled on this AP.
Indicates whether the AP radio is currently enabled or disabled.
This parameter displays one of the following options to show the AP is configured.
sap: Default AP setting.
l
am: AP is configured as an Air Monitor.
l
m-portal: AP is configured as a Mesh portal.
l
m-point: AP is configured as a Mesh point.
l
This parameter displays one of the following options to show the radio's current task:
scan: AP is scanning other channels.
l
tuned: AP is tuned on one channel.
l
locate: AP has been asked to locate a specific AP or client.
l
pcap: The AP is enabled with the Packet Capture feature.
l
The radio channel currently used by an AP's WLAN interface.
Number of packets seen on the interface.
MAC address for the AP's wired interface.
The AP's IP address.
IP address for the AP's gateway.
MAC address for the AP's gateway.
N-reg Last-update
----- -----------
3821 3322965
3821 3322917
Active
------
1144 N/A
*
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Next-update N-updates
----------- ---------
197 10368
187 10378
Last-
-----