Dell PowerConnect W-7200 Series Reference Manual page 1416

spanning-tree vlan range (PVST+)
spanning-tree vlan range <WORD>
[forward-time <value> | hello-time <value> | max-age <value> | priority <value>]
Description
Configure PVST+ on a range of VLANs.
Syntax
Parameter
<WORD>
forward-time
hello-time
max-age
priority
Example
The following command sets the time the VLAN range 2-3 spends in the listening and learning state to 3 seconds:
spanning-tree vlan range 2-3 forward-time 3
The following command sets the time the VLAN range 2-3 waits to transmit BPDUs to 4 seconds:
spanning-tree vlan range 2-3 hello-time 4
The following command sets the time the VLAN range 2-3 waits to receive a hello packet to 30 seconds:
spanning-tree vlan range 2-3 max-age 30
The following command sets the VLAN range 2-3 priority to 10, making it more likely to become the root bridge:
spanning-tree vlan range 2-3 priority 10
Command History
Release
ArubaOS 6.0
1416 | spanning-tree vlan range (PVST+)
Description
Enter a string representing the VLAN range
Specifies the time, in seconds, the VLANs spends in
the listening and learning state before transition to
the forward state.
Set the time interval, in seconds, between
transmission of BPDUs.
Set the time interval for the PVST+ bridge to
maintain configuration information before refreshing
that information.
Set the priority of a bridge to make it more or less
likely to become the root bridge. The bridge with the
lowest value has the highest priority.
When configuring the priority, remember the
following:
The highest priority bridge is the root bridge.
The highest priority value is 0 (zero).
Modification
Command introduced
Range
--
4-30
1-10
6-40
0-65535
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Default
--
15 seconds
2 seconds
20 seconds
32768