Dell PowerConnect W-7200 Series Reference Manual page 996

show firewall-cp
show firewall-cp [internal]
Description
Displays the captive-portal (CP) firewall policies on the controller.
Syntax
No Parameters
Example
The output of this command shows the CP firewall policies.
(host) #show firewall-cp
CP firewall policies
--------------------
IP Version Source IP
contract
---------- ---------
----
ipv4 any
ipv4 10.10.10.10
ipv4 2:2:2:2::2
Command History
Release
ArubaOS 3.4
ArubaOS
6.2
Command Information
Platforms
All platforms
996 | show firewall-cp
Source Mask Protocol
----------- --------
6
2.2.2.2 6
1
Modification
Command introduced.
The IP Version parameter was added.
Licensing
Base operating system
Start Port End Port
---------- --------
21 21
8 9
1 2
Command Mode
Config or Enable mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Permit/Deny hits
----------- ---- ----
Permit 0 test
Permit 0
Permit 0