Dell PowerConnect W-7200 Series Reference Manual page 823

show ap provisioning
show ap provisioning {ap-name <ap-name>}|{bssid <bssid>}|{ip-addr <ip-addr>}
Description
Show provisioning parameters currently used by an AP.
Syntax
Parameter
ap-name <ap-name>
bssid <bssid>
ip-addr <ip-addr>
Example
The output of this command shows that the AP named AP8 has mostly default parameters. These
appear with the value N/A.
(host) #show ap provisioning ap-name AP8
AP "mp2" Provisioning Parameters
--------------------------------
Item
----
(host) (config) #show ap provisioning ap-name 00:24:6c:c7:d5:c8
AP "00:24:6c:c7:d5:c8" Provisioning Parameters
----------------------------------------------
Item
----
AP Name
AP Group
Location name
SNMP sysLocation
Master
Gateway
IPv6 Gateway
Netmask
IP Addr
IPv6 Addr
IPv6 Prefix
DNS IP
DNS IPv6
Domain Name
Server Name
Server IP
Antenna gain for 802.11a
Antenna gain for 802.11g
Antenna for 802.11a
Antenna for 802.11g
Single chain mode for Radio 0
Single chain mode for Radio 1
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Show data for an AP with a specific name.
Show data for a specific Basic Service Set Identifier (BSSID) on an AP. An AP's BSSID is
usually the AP's MAC address.
Show data for an AP with a specific IP address.
Value
-----
Value
-----
00:24:6c:c7:d5:c8
default
N/A
N/A
10.4.62.9
N/A
N/A
N/A
N/A
N/A
64
N/A
N/A
N/A
aruba-master
10.4.62.9
N/A
N/A
both
both
0
0
show ap provisioning | 823