Dell PowerConnect W-7200 Series Reference Manual page 864

show ap spectrum debug
show ap spectrum debug {channel-info|channel-quality|classify|classify-fft|device-
details|device-info|devices-seen} {ap-name <ap-name>}|{ip-addr <ip-addr>} freq-band
{2.4ghz|5ghz}
Description
This command saves spectrum analysis channel information to a file on the spectrum monitor.
Syntax
Parameter
channel-info
channel-quality
classify
classify-fft
device-details
device-info
devices-seen
ap-name <ap-name>
ip-addr <ip-addr>
freq-band 2.4ghz|5ghz
Usage Guidelines
Use this command under the supervision of your Dell technical support representative to troubleshoot spectrum
analysis issues or errors.
Related Commands
Command
ap spectrum local-override
rf dot11a-radio-profilemodespectrum-
mode
rf dot11g-radio-profilemodespectrum-
mode
864 | show ap spectrum debug
Description
Save channel information for later analysis.
Save channel quality information for later analysis
Save information on classification for later analysis.
Save information on classification and FFT data for later analysis.
Save device details for later analysis.
Save device information for later analysis.
Save information on devices seen by the spectrum monitor.
Name of the spectrum monitor for which you want to view spectrum information.
IP address of the spectrum monitor for which you want to view spectrum information.
Save information for a specific radio type, either 2.4 GHz or 5 GHz.
Description
Convert an AP or AM into a spectrum
monitor by adding it to the spectrum local-
override list.
Set a 802.11a radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Set a 802.11g radio so the device operates
as an spectrum monitor, and can send
spectrum analysis data to a desktop or
laptop client.
Mode
Config mode on master or local
controllers
Config mode on master or local
controllers
Config mode on master or local
controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide