show log network
show log network{[<number>][all]}
Description
Show the controller's system network errors.
Syntax
Parameter
<number>
all
Example
This example shows the controller's recent network log errors
(host) #show log network all
Feb 17 14:47:14 :209801:
Feb 17 14:48:04 :209801:
Command History
This command was available in ArubaOS 3.0.
Command Information
Platforms
All platforms
1140 | show log network
Description
Start displaying the log output from the specified number of lines from the end of the log.
Shows all the network logs for the controller.
<WARN> |fpapps|
Physical link down: port 1/1
<WARN> |fpapps|
Physical link down: port 1/1
Licensing
Base operating system
Command Mode
Available in Enable and Config modes.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide