Dell PowerConnect W-7200 Series Reference Manual page 544

router mobile
router mobile
Description
This command enables Layer-3 (IP) mobility.
Syntax
No parameters.
Usage Guidelines
IP mobility is disabled by default on the controller. You need to use this command to enable IP mobility. This
command must be executed on all controllers (master and local) that need to provide support for layer-3 roaming in
a mobility domain.
You can disable IP mobility in a virtual AP profile with the wlan virtual-ap command (IP mobility is enabled by
default in a virtual AP profile).
Example
This command enables IP mobility:
(host) (config) #router mobile
Command History
Release
ArubaOS 3.0
Command Information
Platforms
All platforms
544 | router mobile
Modification
Command introduced
Licensing
Base operating system
Command Mode
Config mode on master controllers
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide