Dell PowerConnect W-7200 Series Reference Manual page 1324

show voice client-status
show voice client-status [active-only | bssid | essid <value> |
extn <value> | ip <ip_address> | proto <value> | sta <value>]
Description
Displays list of voice clients and their status. You can also view details of a specifc voice client.
Syntax
Parameter
active-only
bssid
essid
extn
ip <ip-address>
proto <protocol>
sta
Example
The output of this command shows details about all the voice clients on a controller.
(host) #show voice client-status
Voice Client(s) Status
----------------------
Client(IP)
Status BSSID
----------
-- -----
10.15.22.32
00:1a:1e:80:bb:10
Num Clients:1
Flags: V - Visitor, W - Wired, R - Remote
Command History
Version
ArubaOS 3.3.1
ArubaOS 6.0
1324 | show voice client-status
Description
Filter records based on active voice clients
Filter records based on BSSID of a voice client.
Filter records based on ESSID of a voice client.
Filter records based on the extension of a voice client.
Filter records based on the IP address of a voice client.
Filter records based on a VOIP protocol. Supported values are:
SIP
l
SVP
l
NOE
l
SCCP
l
VOCERA
l
H323
l
Filter records based on the MAC address of a voice client.
Client(MAC) Client Name
ESSID
----------- -----------
-----
00:1f:6c:7a:d5:30 6001
keepwalking1
Description
Command introduced.
The sta parameter was introduced.
ALG Server(IP)
AP Name Flags
--- ----------
------- -----
sccp 10.15.32.20
AP-L-125
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Registration State Call
------------------ ---------
REGISTERED Idle