Table of Contents
Advertisement
Parameter
Beacons Transmitted
Tx Probe Responses
Tx Data Frames
Multicast Data
Tx CTS Frames
DTIM Timeouts
Dropped After Retry
Dropped No Buffer
Dropped UAPSD
Missed ACKs
Failed Beacons
Multi-Beacon Fail
Long Preamble
Short Preamble
Beacon Interrupts
TX Interrupts
FIFO Underrun
Allocated Desc
Freed Desc
Tx EAPOL Frames
Tx AGGR Good
Tx AGGR Unaggr
Tx <number> Mbps
Tx <number> Mbps [Long]
Tx <number> Mbps
[Short]
Tx HT <number> Mbps
Tx WMM
740 | show ap debug radio-stats
Description
Number of beacons transmitted.
Number of transmitted probe responses.
Number of transmitted data frames.
Number of multicast and broadcast frames transmitted.
Number of clear-to-sent (CTS) frames transmitted.
Number of broadcast frames with DTIM data that were not answered by a client.
Number of frames dropped after an attempted retry.
Number of frames dropped because the AP's buffer was full.
Number of dropped Unscheduled Automatic Power Save Delivery (UAPSD) frames.
Number of missed acknowledgement frames.
Number of times a radio failed to transmit a beacon at the scheduled interval (100ms).
Number of times multiple consecutive beacons failed to transmit.
Number of frames sent with a long preamble.
Number of frames sent with a short preamble.
Number of broadcast beacons that were interrupted.
Number of transmission interrupts.
The number of Receive FIFO overruns.
Number of allocated transmit descriptors.
Number of freed transmit descriptors.
Number of Extensible Authentication Protocol over LAN (EAPOL) frames transmitted
Number of aggregated frames successfully transmitted.
Number of non-aggregate frames transmitted due to unavailability of additional frames
for aggregation at the time of transmission.
Number of frames transmitted at the specified rate (in Mbps).
Number of frames with a long preamble transmitted at the specified rate.
Number of frames with a short preamble transmitted at the specified rate.
Number of high-throughput frames transmitted at the specified rate.
Number of Wifi Multimedia (WMM) packets transmitted for the following access
categories. If the AP has not transmitted packets in a category type, this data row will not
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Advertisement
Table of Contents
