Table of Contents
Advertisement
show interface tunnel
show interface tunnel
Description
Displays information about tunnel interfaces.
Syntax
No parameters
Example
The example below shows the output of show interface tunnel.
#show interface tunnel 2000
Tunnel 2000 is up line protocol is up
Description: Tunnel Interface
Internet address is 3.3.3.1 255.255.255.0
Source
192.168.203.1
Destination 192.168.202.1
Tunnel mtu is set to 1100
Tunnel is an IP GRE TUNNEL
Tunnel is Trusted
Inter Tunnel Flooding is enabled
Tunnel keepalive is disabled
he output of this command includes the following parameters:
Parameter
Tunnel 2000 is...
line protocol is...
Description
Internet address is...
Source
Destination
Tunnel mtu is set to...
Tunnel is an...
Tunnel is...
Inter tunnel flooding
is...
Tunnel keepalive is...
1052 | show interface tunnel
Description
Status of the specified tunnel.
Displays the status of the line protocol on the specified tunnel.
Description of the specified interface.
IP address and subnet mask of the specified interface.
IP address of the tunnel's source.
IP address of the tunnel's source.
Size of the specified tunnel's MTU.
Description of the specified tunnel.
Whether or not the specified tunnel is trusted.
Status of inter tunnel flooding on the specified tunnel.
Status of tunnel keepalive on the specified tunnel.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Advertisement
Table of Contents
