Dell PowerConnect W-7200 Series Reference Manual page 538

rf ht-radio-profile
rf ht-radio-profile <profile>
40MHz-intolerance
clone <profile>
diversity-spreading-workaround
honor-40MHz-intolerance
no
Description
This command configures high-throughput AP radio settings. High-throughput features use the IEEE 802.11n
standard.
Syntax
Parameter
<profile>
40MHz-
intolerance
clone
honor-40MHz-
intolerance
no
diversity-spreading-
workaround
538 | rf ht-radio-profile
Description
Name of this instance of the profile. The name
must be 1-63 characters.
Default Options:
"Default-a" is generally used in association
l
with high-throughput devices running on the 5
GHz frequency band, see "rf dot11a-radio-
profile" on page 519.
"Default-g" is generally used in association
l
with high-throughput devices running on the
2.4 GHz frequency band, see
profile" on page 527.
"Default" is generally used when the same ht-
l
radio-profile is desired for use with both
frequency bands.
Controls whether or not APs using this radio
profile will advertise intolerance of 40 MHz
operation. By default, 40 MHz operation is
allowed.
Name of an existing high-throughput radio profile
from which parameter values are copied.
When enabled, the radio will stop using the 40
MHz channels if the 40 MHz intolerance indication
is received from another AP or station.
Negates any configured parameter.
When this feature is enabled, all legacy
transmissions will be sent using a single antenna.
This enables interoperability for legacy or high-
throughput stations that cannot decode 802.11n
cyclic shift diversity (CSD) data.
This feature is disabled by default and should be
kept disabled unless necessary.
Range
—
"rf dot11g-radio-
—
—
—
—
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Default
default-a
default-g
default
disabled
—
enabled
—
disabled