Table of Contents
Advertisement
Parameter
Tx HT 216 Mbps
Tx HT 240 Mbps
Tx HT 243 Mbps
Tx HT 270 Mbps
Tx HT 300 Mbps
Tx WMM
UAPSD OverflowDrop
Last SNR
Last SNR CTL0
Last SNR CTL1
Last SNR CTL2
Last ACK SNR
Last ACK SNR CTL0
Last ACK SNR CTL1
Last ACK SNR CTL2
Last ACK SNR EXT0
Last ACK SNR EXT1
Last ACK SNR EXT2
Frames Received
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Number of frames transmitted at 216 Mbps.
Number of frames transmitted at 240 Mbps.
Number of frames transmitted at 243 Mbps.
Number of frames transmitted at 270 Mbps.
Number of frames transmitted at 300 Mbps.
Number of Wifi Multimedia (WMM) packets transmitted for the following access
categories. If the AP has not transmitted packets in a category type, this data row will not
appear in the output of the command.
Tx WMM [BE]: Best Effort
Tx WMM [BK]: Background
Tx WMM [VO]: VoIP
Tx WMM [VI]: Video
Number of Wifi Multimedia (WMM) VoIP packets transmitted.
Number of packets dropped due to Unscheduled Automatic Power Save Delivery (U-APSD)
overflow.
The last recorded signal-to-noise ratio.
The signal-to-noise ratio for the last received data packet on the primary (control) channel
0. This parameter is only displayed for APs operating in 40 Mhz mode.
The signal-to-noise ratio for the last received data packet on the secondary (control)
channel 1. This parameter is only displayed for APs operating in 40 Mhz mode.
The signal-to-noise ratio for the last received data packet on the secondary (control)
channel 2. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet.
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 0.
This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 1.
This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the primary (control) channel 2.
This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel
0. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel
1. This parameter is only displayed for APs operating in 40 Mhz mode.
Signal-to-noise ratio for the last received ACK packet on the secondary (extension) channel
2. This parameter is only displayed for APs operating in 40 Mhz mode.
Number of frames received.
show ap debug bss-stats | 719
Advertisement
Table of Contents
