Dell PowerConnect W-7200 Series Reference Manual page 955

Parameter
trusted
tunneled-node
untrusted-vlan
<slot/port>
xsec
rap-bw-resv
ap-name
ip-addr
rap-pkt-trace
ap-name
ip-addr
rap-stats
ap-name
ip-addr
route
ap-name <ap-name>
counters
ip-addr <ip-address>
ipv4
ipv6
table
verbose
route-cache
ap-name <ap-name>
counters
ip-addr <ip-address>
ipv4
ipv6
table
verbose
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Displays the the trusted ports.
Displays the the tunneled node ports.
Show if there are untrusted vlan entries for the indicated slot and port.
Displays the xsec ports.
Displays the remote AP uplink BW reservation statistics of the RAP only.
Displays the remote AP packet-trace statistics of the RAP only.
Displays the remote AP statistics of the RAP only.
Displays datapath route table statistics.
Name of the AP.
Displays route table statistics such as current entries, high water mark, maximum
entries, total entries, allocation failures and max link length.
IP address of the AP.
Displays datapath IPv4 routing table.
Displays datapath IPv6 routing table.
Displays route table entries such as IP, mask, gateway, cost, VLAN and flags.
Displays all detailed route table entries including IP, mask, gateway, cost, VLAN,
flags, Internal VerNum Index.
Displays datapath route cache table statistics.
Name of the AP.
Displays route cache table statistics such as current entries, high water mark,
maximum entries, total entries, allocation failures and max link length.
Address of IP.
Displays datapath IPv4 route cache.
Displays datapath IPv6 route cache.
Displays route cache table entries such as IP, mask, gateway, cost, VLAN and
flags.
Displays all detailed route cache table entries including IP, mask, gateway, cost,
VLAN, flags, Internal VerNum Index.
show datapath | 955