Dell PowerConnect W-7200 Series Reference Manual page 1083

show ip pppoe-info
show ip pppoe-info
Description
Display configuration settings for Point-to-Point Protocol over Ethernet (PPPoE).
Syntax
No parameters.
Examples
The example below shows the current PPPoE configuration.
(host) #show ip pppoe-info
PPPoE username: rudolph123
PPPoE password: <HIDDEN>
PPPoE service name: ppp2056
PPPoE VLAN: 22
The output of this command includes the following parameters:
Parameter
PPPoE username
PPPoE password
PPPoE service
name
PPPoE VLAN
Command History
Introduced in ArubaOS 3.0.
Command Information
Platforms
All platforms
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
PAP username configured on the PPPoE access concentrator.
If this parameter displays the word <HIDDEN>, a PAP password is configured on the PPPoE
access concentrator. If this parameter is <NONE>, there is no PPOE password configured.
PPPoE service name.
VLAN configured to use PPPoE to obtain an IP address via the command interface vlan <id> ip
address pppoe.
Licensing
Base operating system
Command Mode
Available in Config or Enable mode on master
or local controllers
show ip pppoe-info | 1083