Table of Contents
Advertisement
show ids rate-thresholds-profile
show ids rate-thresholds-profile <profile-name>
Description
Show an IDS Rate Thresholds profile.
Syntax
Parameter
<profile-name>
Usage Guidelines
Issue this command without the <profile-name > parameter to display the IDS Rate Threshold profile list. Include a
profile name to display detailed configuration information for that profile.
Examples
The example below shows that the controller has three configured IDS Rate Threshold profiles.
(host) (config) #show ids rate-thresholds-profile
IDS Rate Thresholds Profile List
--------------------------------
Name
----
default
probe-request-response-thresholds
test
Total:3
In the example above, the Reference column indicates the number of references to the profile named in the Name
column. The Profile Status column is blank unless the rule is predefined.
This example displays the configuration settings for the profile test
(host) (config) #show ids rate-thresholds-profile test
IDS Rate Thresholds Profile "test"
----------------------------------
Parameter
---------
Channel Increase Time
Channel Quiet Time
Channel Threshold
Node Time Interval
Node Quiet Time
Node Threshold
The output of this command includes the following parameters:.
Dell PowerConnect W-Series ArubaOS 6.2 | Reference Guide
Description
Name of an IDS Rate Threshold profile.
References
----------
20
10
0
Value
-----
15 sec
900 sec
300
15 sec
900 sec
200
Profile Status
--------------
Predefined
.\
show ids rate-thresholds-profile | 1023
Advertisement
Table of Contents
